Although Swedish redwood is a softwood, it remains one of the toughest materials used in the construction of benches and tables. Capable of withstanding large amounts of weight, our pub benches and picnic tables will still be standing strong after years of constant use. Redwood is resistant to decay and insects.
In contrast, whitewood is commonly used for boxes, crates or carcassing with a lot going into the manufacture of pulp and paper
Dark Red Meranti / Seraya Specie Technical Specifications – We specializes in Exotic Hardwood Flooring and Decking, Refinished Solid Flooring, Unfinished Solid Flooring and Engineered Flooring, and Imported Plywood and Panels.
Beech Wood Lumber is primarily reddish-brown in color and slightly coarse with conspicuous rays and tiny pores. The grain is straight with a fine, even texture. High crush strength, medium stiffness and resistance to shock and excellent bending characteristics. Sizes available 4/4, 8/4.
Blockboard is composed of a core of softwood strips (up to about 25mm wide) placed edge to edge and sandwiched between veneers of hardwood, the ‘sandwich’ is then bonded under high pressure.
An interior grade adhesive is normally used, so blockboard is not suitable for use out of doors.
When using blockboard for such items as a door or a long table, make sure the core runs lengthways to give maximum strength. Blockboard can be used for shelves, doors, paneling and partitions.
Blockboard is normally available in 2440 x 1220 sheets (or subdivisions), thicknesses tend to be limited to around 30mm.
Fancy plywood is much more expensive than ordinary commercial plywood. In general, the price of fancy/back veneer (outer veneer) is 2~6 times that of ordinary hardwood/back veneer (such as red hardwood veneer, Okoume veneer, red Canarium veneer, poplar paste) Face, pine veneer, etc.)
Today’s most popular substrate and thin construction panel, Medium Density Fiberboard is available in 4′ x 8′ sheets, and thicknesses of 2.5mm – 18mm.Other sizes available upon request. MDF Colour (one side & two side), Main advantages of coloured MDF:
Hardboard is a compressed, composite board. Fiber residuals are saturated in a wet process and then compressed to a sheet. A fine fiber overlay is applied (normally to one side) to provide smooth face. Hardboard is available in 49″ x 97″ sheets and standard thicknesses of: 5.0mm, 3/8″, 1/2″, 5/8″, 3/4″ Other sizes and thicknesses available upon request.White Wood Red Wood (Moski)
Due to its durability film faced plywood is widely used in construction and building and vehicle industry for making transport equipment containers, loading platforms, truck and trailer floors and wagons. This material is also used for making furniture such as chairs, tables, sofas, beds etc.
Memel Timber is very similar to that from Dantzic, but is considered hardly so strong. The scantlings of the balks are rather smaller, being from 13 to 14 inches square. Riga Timber is like the other varieties just described, but the annual rings are closer.
Available with us is an extensive assortment of shuttering plywood, water resistant shuttering plywood which is designed for special application purposes. Our range rates high on durability as 170 GSM phenolic is carefully applied on both the sides of the ply to impart it with a superfine mirror finish on the surface and a water resistant layer which requires no further finishing and is widely appreciated across all civil construction firms for use in casting concrete slabs, beams and column boxes for a minor finish output.
For better finishing and exotic look We can provide standard sizes for internal use are 305x305x10 mm (12″x12″ x3/8″), 400x400x10 mm (16″x16″ x3/8″), 457x457x10 (18″x18″ x3/8″) and also 600x600x10 mm tiles.